Kenwood KAC-PS704EX

Title 4/3 Channel Power Amplifier Amplifier Type Class AB Series PERFORMANCE SERIES CEA-2006 Primary Ratings Power Output 70Watts RMS x 4 at 4 Ohms and ≤1%THD+N Signal-to-Noise Ratio 80 dBA (Reference: 1Watt into 4Ohms) Maximum Power Output MAX POWER 1000W Power Output Rated Power at 14.4V 70Watts RMS x [ch] (4 Ohms, 20-20kHz, ≤1.00 % THD) 100Watts RMS x [ch] (2 Ohms, 1kHz, ≤1.00 % THD) 200Watts RMS x [ch/2] (Bridged 4 Ohms, 1kHz, ≤1.00 % THD) Specifications Signal to Noise Ratio 100dB (Reference: Rated Power into 4Ohms at 14.4V) Frequency Response 20Hz-50kHz (+0dB, -3dB) Class AB Input Impedance 10k ohm Speaker Impedance (Single End connection) 4Ω ( 2 Ω to 8 Ω allowable) Speaker Impedance (Bridged connection) 4 Ω to 8 Ω allowable Audio Section Low-Pass Filter Built in Variable Low-Pass Filter (50Hz-200Hz, -24dB/oct) High-Pass Filter Built in High-Pass Filter (80Hz, -12dB/oct) RCA Input Sensitivity 0.2[V] - 5.0[V] Speaker Level Input Sensitivity 4.0[V] - 12.0 [V] Terminals Battery & Ground Screw Type Terminal Block (Nickel colored) (M4) Speaker Output Screw Type Terminal Block (Nickel colored) (M4) Line In RCA (Nickel colored) Speaker Input Connector (Balance) General Dimensions(WxHxD) 335 [mm] x 56 [mm] x 204 [mm] 13-3/16 inch x 2-3/16 inch x 8-1/16 inch Weight (kg) 2.6 [kg] 5.7 [lbs] Operating Voltage 14.4 V(11.0 - 16.0 V allowable) Current Consumption 32 [A] Key Features CTA-2006 Compliant 2 Ohms Load Capability Speaker Level Input Signal Sensing Turn-on Cooling Fan Power MOS-FET Switching Power Supply Cast Aluminum Heat Sink Design Others Triangle Indicator